Can You Use Any Carpet Cleaner in a Bissell

Generally, you can use any carpet cleaner in a Bissell machine as long as it’s meant for the type of material you’re cleaning.

For example, if you have an upright Bissell machine and want to clean a large area rug, make sure the cleaner is designed for multiple surfaces.

If your Bissell is a portable spot cleaner, use a carpet cleaner that is meant for stains and spots.

The benefit of using a Bissell-specific cleaner is that they are formulated to work with the machine’s water filtration system. Using a different brand could potentially damage your machine, so consider purchasing carpet cleaners.

Can Bissell Get Rid Of Urine And Vomit Stains?

While Bissell makes multiple products to get rid of stains, their cleaners are not designed to remove them. If you have a pet with an accident or a sick household member who vomits, it’s best to use a cleaner made for specific types of spots and spills. There are three types available:

• Cleaners for dried spots
• Cleaners for wet spots
• Stain and Odor Removers

Make sure to always read the instructions. You should never leave a cleaner on the carpet overnight, so only use cleaners made for stains when necessary. If you have an accident or vomit stain, it’s best to immediately clean up any material that could potentially damage your carpet or leave a stain.

Can Bissell clean the edges of your carpeting?

Bissell makes several products that are designed to clean the edges of your carpeting. If you have an upright machine, it may be easier to use a cleaner made for this purpose because most Bissell machines are not designed to handle liquids.

However, you can use specific tools with any type of machine to address hard-to-reach areas. Bissell makes many specialty tools for this purpose, such as:

• The Deluxe Rug and Upholstery Tool
• The Deep Reach tool

Both will help remove dirt and pet hair from those hard-to-reach places, but you can also use items around your house like a squeegee or a small piece of furniture to clean the edges of your carpet.

Using Incompatible Cleaners in a Bissell Machine

Using the Wrong Cleaner in a Bissell: Problems and Solutions

A Bissell carpet cleaner is designed to work with a wide range of cleaners, but only if the right kind is used. Improper use can cause problems such as suction problems or less-than-satisfactory results. Read on for information about using the right solutions in your Bissell and how to address common problems with using the wrong cleaner.

What Type of Carpet Cleaner Do You Need?

Cleaning Solution or Pre-Treatment for Stains

The first thing you need is the correct type of carpet cleaner. The solution must dissolve stains without leaving behind any bleach or soap residue, which can damage carpet fibers.

You can purchase pre-treatment solutions designed to lift tough stains right out of the carpet. Both types of cleaners should be suitable for use in a Bissell machine with little risk of causing damage to it.

Shampooer Solution

If your carpets look dingy and you want to give them a fresh, clean look, you may want to shampoo them. Making your solution at home can be effective, but it’s also time-consuming and cost-prohibitive. Instead, purchase one of the many Bissell carpet cleaner solutions on the market for use in your machine.

Machine Cleaner

Certain types of machines require specific types of cleaners. For example, if you want to use a portable deep cleaner, such as the Bissell DeepClean Deluxe Portable Carpet Cleaner, make sure that the cleaner is recommended for use with this type of machine.

Using a Solution That’s Not Recommended for Your Machine

Using a cleaning solution that’s not designed for your machine can cause damage to it. For example, if you use a dishwashing detergent in a Bissell carpet cleaner that has not been designed for that specific type of machine, you risk damaging the suction motor.

Using too much soap can also cause suction problems and require more frequent cleanings with fresh water to avoid leaving behind soap residue on your carpets.

Some soapy water residue is normal, but there shouldn’t be a thick, bubbly layer of soap on your carpet after cleaning unless you have used too much solution.

If you suspect that the Bissell carpet cleaner isn’t working as it should, check to see if you’re using a suitable cleaning agent or whether any soap residue is being left behind.

Choosing a Solution That’s Not Right for Your Machine

Many Bissell carpet cleaners can be used with a wide range of solutions, but some machines have specific needs. For example, the Bissell Big Green Deep Carpet Cleaner uses its specially-formulated solution to release detergent and scrub the dirt out of deep carpet fibers.

Using the wrong solution could cause damage to the machine and may void your warranty. Get your Bissell Carpet Cleaner Solution now!

FAQs about Using Incompatible Cleaners in a Bissell Machine

Q: How do I know if my machine is compatible with the solution I want to use?

In most cases, your machine will be marked as suitable for use with a specific type of cleaner. Check the manual before you decide which cleaner is suitable for your needs. If there is no mention of compatibility, you can contact Bissell’s customer service team with questions about your specific machine.

Q: What if I accidentally used the wrong cleaner?

If this happens, run several water cycles in the machine to clear out any residue, then use a carpet shampoo recommended for your particular make and model of the unit.

Q: How do I know when I need to replace my Bissell cleaner solution?

You should purchase a new bottle of cleaner every time you finish cleaning with your machine. The cleaner may start to separate or develop an unpleasant odor, which can lead to damage if used in the machine. If this happens, stop using it immediately and dilute it with additional water because this can also cause damage.

Q: What can I do with a leftover cleaner?

If you have a large bottle that’s too big to use in one session, store it in a cool, dark place, and don’t add water until you’re ready to use it in the machine. If the cleaner separates in the bottle or develops an unpleasant odor, discard it and purchase a new bottle.

Final Verdict

Don’t compromise with inferior products when you want to use a Bissell carpet cleaner. Instead, please choose one of the many Bissell carpet cleaning solutions that are available for use in your machine and designed to work with it.

Can you use any carpet cleaner in a Bissell? No! Using an incompatible solution can damage your machine. If you’re unsure about which solution to use, check the manual or contact Bissell for advice.